Thursday, October 21, 2010

1/100 SVMS-010 Over Flag Build Part III

1/100 SVMS-010 Over Flag

It sure has been hot around my parts of the world. I'm starting to wonder why this is so considering that its already nearing December so Asia should be expecting cooler weather... oh well, chalk it up to global warming. Thankfully today I was able to assemble already the leg parts I had left to dry the day before. Previous post on this build could be found here.

I don't know that those grey rod parts are supposed to be but they are tucked in the shins of the legs.
1/100 SVMS-010 Over Flag
1/100 SVMS-010 Over Flag

Here's one of the feet parts.

1/100 SVMS-010 Over Flag

1/100 SVMS-010 Over Flag

1/100 SVMS-010 Over Flag

Then here's the foot attached to the leg already.
1/100 SVMS-010 Over Flag
Then the waist part. I made sure to tape over the male parts of the waist that will have the chest and leg parts slide through so that it won't get covered by paint. Why I did this was so that the part will slide through easily come assembly time without any paint on it.
1/100 SVMS-010 Over Flag
Here's the leg all build up and connected to the waist.

1/100 SVMS-010 Over Flag

Then once the waist was done I decided to skip a few steps in the manual and attach it already to the upper torso.
1/100 SVMS-010 Over Flag

That's all for this build post. My apologies for this lackadaisical build post. Its the heat really finally getting to me. Oh well, hopefully there will be some rains that will cool this little spot of parched earth that I live in.

Part IV of this build can be found here.