The yellow parts of the top part of the pelvic armor is just yellow foil tape that came along with the kit.
Included with this part of the build was the assembly of the Kyrios’ shield. The outer shell parts had the same color of the Kyrios, wherein I used Pylox Caterpillar Yellow spray paint. The inner parts I used Pylox Metallic Smokey Black.
The shield doubles up as a claw which can open up to crush enemies.
This is the rear part of the shield that connects to the main part. This is also the part that enables the shield to be attached to the arm of the Kyrios.
Here’s the assembled shield with the claw at the closed position.
Here’s the shield opened up. You can actually flex the rear part of the shield upward due to its joint design. It looks like a scorpion with its tail up if you do this. I wonder if this was really part of the design or a lucky accident?
Submit Comment : 
The connector to attached leg to the pelvis is kind of very loose, so i can’t make Kyrios to pose without Action Base. Do you have the same problems? If yes, how do you manage to fix it. I try to use some adhesive glue, but it still can do much.
didn’t have that problem with my Gundam Kyrios. I guess you could try inserting a piece of paper between the joint to make the fit tighter, it that is what’s causing the problem.
:D